In our houses, faucets are most likely the most often utilized domestic item. As a result, individuals clean or refurbish them frequently throughout the year.
However, the cost of hiring a worker for each cleaning is expensive. Thus, they searched for instructions on how to remove Moen bathroom sink faucet handles themselves. Let’s read this blog to know the safe way of replacing it.
Types Of Moen Bathroom Sink Faucet Handles
Moen provides many lavatory faucets, classified as one-handle, two-handle center set, widespread, and wall mount.
Moen bathroom faucets are available in various designs, including single-handle and double-handle models. Some types include screws to hold them in place, whereas others do not.
Generally, this blog will mention two kinds of mounts: friction fit mounts and capped screw mounts. Regardless of the style of the faucet, removing the handle isn’t too difficult.
Can You Remove Moen Bathroom Sink Faucet Handles Without Screws?
Absolutely, yes. Removing the Moen sink faucet handle without screws will be easier if you carefully read and follow the procedure outlined below.
Step 1: Remove Caps Using a Flat Screwdriver
Next, locate a crack in the faucet cap and place a flat screwdriver into it; work gently until the lid pops up. Once the cover is removed, you’ll notice some concealed set screws.
Step 2: Locate and remove any hidden screws.
When you remove the cap, you’ll discover some concealed set screws. Use the wrench that comes with the faucet to unscrew it or a multi-hex wrench tool to assist you in selecting the proper size.
Step 3: Remove the handle.
Pull the handle with the regular hand after the screw has been removed. If you become caught, grab the faucet pieces with pliers and pull the handle out. As previously said, cover the faucet handle base to minimize needless scratches.
How To Remove Moen Bathroom Sink Faucet Handles
There is a slight difference between removing the Moen sink faucet handle and a handle without screws. Professional plumbers think that removing Moen bathroom sink faucet handles is more difficult.
Firstly, you’ll need the following items:
- A flat screwdriver
- Puller for a faucet
- A combination of rag water and vinegar
- Pliers with a needle nose
Step 1: Shut off the water and cover the drain.
Before doing any plumbing repair, turn off the water supply.
Cover and shut the drain with the rug to prevent any small screws from being trapped.
Step 2: Locate and remove the Handle Connections.
Because you’ll need to remove the handle, figure out how it’s joined to the base deck plate.
Gently grip the cap and spin it to the left or counterclockwise.
Step 3: Unscrew the Screw
Place the wrench on each side of the screw’s base and slowly spin it to the left. You don’t have to apply a lot of force all at once. With a moderate push, the screw should come loose. To access the screw head, you can alternatively use a socket wrench.
Step 4: Remove the cartridge
Check the cartridge after removing the handle. The cartridge is shaped like a cylinder with a tiny lip on one end. It is a location where a lot of scales accumulate due to continual contact with water.
Step 5: Thoroughly clean everything
Use the cloth and vinegar solution to remove the dirt and minerals accumulated in the region.
Step 6: Replace the handle and the faucet.
If you reverse all of the preceding processes, you’ll be able to reattach the faucet in no time. Note the locations of each part as you remove it so that you can quickly reinstall it.
How To Tighten The Moen Bathroom Sink Faucet Handles?
The only equipment required for this technique includes a flat head screwdriver, pliers, an Allen Wrench (Hex), Flashlight, and Wrench.
Before beginning these procedures, switch off the water supply. To cut off the water supply, turn both valves clockwise till they are completely closed. To remove residual pressure and ensure that everything is in working condition, completely open the faucet handles.
A tiny hole will be seen around the circumference of your faucet handle if it is fastened to the platen with a set screw. There’s an Allen screw within the hole. Before rotating the set screw counterclockwise until it’s securely lodged, use an appropriate Allen wrench.
Locate and clean the area beneath the sink to tighten a retaining nut. The wrench tightens the retaining nut until it is snug! Come out from beneath your sink and physically check that everything is as secure as possible before continuing to clean up around there.
Finally, tightening the faucet handle assures that the faucet will not fall off its track and will continue to function for years to come.
It is clear from this blog that understanding how to remove the Moen bathroom sink faucet handles is not difficult. Rather, it is a straightforward procedure that takes only a few minutes and adds to your knowledge.
Lastly, avoid using excessive effort when pulling or twisting when working with the Moen faucet. It might harm not just the faucet but also the sink.